Degradation and effect of hydrogen peroxide in small‐scale recirculation aquaculture system biofilters

From an environmental point of view, hydrogen peroxide (HP) has beneficial attributes compared with other disinfectants in terms of its ready degradation and neutral by‐products. The rapid degradation of HP can, however, cause difficulties with regard to safe and efficient water treatment when applied in different systems. In this study, we investigated the degradation kinetics of HP in biofilters from water recirculating aquaculture systems (RAS). The potential effect of HP on the nitrification process in the biofilters was also examined. Biofilter elements from two different pilot‐scale RAS were exposed to various HP treatments in batch experiments, and the HP concentration was found to follow an exponential decay. The biofilter ammonia and nitrite oxidation processes showed quick recuperation after exposure to a single dose of HP up to 30 mg L^?1. An average HP concentration of 10–13 mg L^?1 maintained over 3 h had a moderate inhibitory effect on the biofilter elements from one of the RAS with relatively high organic loading, while the nitrification was severely inhibited in the pilot‐scale biofilters from the other RAS with a relatively low organic loading. A pilot‐scale RAS, equipped with two biofilter units, both a moving‐bed (Biomedia) and a fixed‐bed (BIO‐BLOK^®) biofilter, was subjected to an average HP concentration of ～12 mg L^?1 for 3 h. The ammonium‐ and nitrite‐degrading efficiencies of both the Biomedia and the BIO‐BLOK^® filters were drastically reduced. The filters had not reverted to pre‐HP exposure efficiency after 24 h, suggesting a possible long‐term impact on the biofilters.     

Einfluss assoziativer rhizosphärenbakterien auf die äHrstoffaufnahme und den Ertrag von Mais

In mehrjährigen Feldversuchen (1990–1995) in Nordostdeutschland wurde der Einfluß selektierter assoziativer Rhizosphärenbakterien auf den Ertrag und die Nährstoffaufnahme bei Mais untersucht.

Der Trockenmasse‐ und Kolbenertrag zur Siloreife bzw. der Samenertrag wurde durch die Bakterienstämme Pseudomonas fluorescens (PsIA12), Agrobacterium rhizogenes (A1A4), Rhizobium trifolii (R39) und z.T. durch Stenotrophomonas maltophilia (PsIB2) in den Jahren 1990 bis 1995 auf lehmigen Sandböden wiederholt signifikant, auf sandigem Lehm zum Teil signifikant erhöht. Maissorten können unterschiedlich auf die Bakterieninokulation reagieren. Die Bakterien stimulierten insbesondere bei Jungpflanzen die Wurzelentwicklung und die Nährstoffaufnahme (N, P, K) aus dem Boden. Sie bildeten Phytohormone (Auxine und z.T. Cytokinine) und überlebten, auch unter Feldbedingungen, im Rhizosphärenraum von Mais während der gesamten Vegetation.     

Effects of irrigation strategies and soils on field grown potatoes: Yield and water productivity

Yield and water productivity of potatoes grown in 4.32 m² lysimeters were measured in coarse sand, loamy sand, and sandy loam and imposed to full (FI), deficit (DI), and partial root-zone drying (PRD) irrigation strategies. PRD and DI as water-saving irrigation treatments received 65% of FI after tuber bulking and lasted for 6 weeks until final harvest. Analysis across the soil textures showed that fresh yields were not significant between the irrigation treatments. However, the same analysis across the irrigation treatments revealed that the effect of soil texture was significant on the fresh yield and loamy sand produced significantly higher fresh yield than the other two soils, probably because of higher leaf area index, higher photosynthesis rates, and “stay-green” effect late in the growing season. More analysis showed that there was a significant interaction between the irrigation treatments and soil textures that the highest fresh yield was obtained under FI in loamy sand. Furthermore, analysis across the soil textures showed that water productivities, WP (kg ha⁻¹ fresh tuber yield mm⁻¹ ET) were not significantly different between the irrigation treatments. However, across the irrigation treatments, the soil textures were significantly different. This showed that the interaction between irrigation treatments and soil textures was significant that the highest significant WP was obtained under DI in sandy loam. While PRD and DI treatments increased WP by, respectively, 11 and 5% in coarse sand and 28 and 36% in sandy loam relative to FI, they decreased WP in loamy sand by 15 and 13%. The reduced WP in loamy sand was due to nearly 28% fresh tuber yield loss in PRD and DI relative to FI even though ET was reduced by 9 and 11% in these irrigation treatments. This study showed that different soils will affect water-saving irrigation strategies that are worth knowing for suitable agricultural water management. So, under non-limited water resources conditions, loamy sand produces the highest yield under full irrigation but water-saving irrigations (PRD and DI) are not recommended due to considerable loss (28%) in yield. However, under restricted water resources, it is recommended to apply water-saving irrigations in sandy loam and coarse sand to achieve the highest water productivity.     

Pacific herring, Clupea pallasi, recruitment in the Bering Sea and north-east Pacific Ocean, II: relationships to environmental variables and implications for forecasting

Previous studies have shown that Pacific herring populations in the Bering Sea and north-east Pacific Ocean can be grouped based on similar recruitment time series. The scale of these groups suggests large-scale influence on recruitment fluctuations from the environment. Recruitment time series from 14 populations were analysed to determine links to various environmental variables and to develop recruitment forecasting models using a Ricker-type environmentally dependent spawner–recruit model. The environmental variables used for this investigation included monthly time series of the following: southern oscillation index, North Pacific pressure index, sea surface temperatures, air temperatures, coastal upwelling indices, Bering Sea wind, Bering Sea ice cover, and Bering Sea bottom temperatures. Exploratory correlation analysis was used for focusing the time period examined for each environmental variable. Candidate models for forecasting herring recruitment were selected by the ordinary and recent cross-validation prediction errors. Results indicated that forecasting models using air and sea surface temperature data lagged to the year of spawning generally produced the best forecasting models. Multiple environmental variables showed marked improvements in prediction over single-environmental-variable models.     

Use of a cyclic high-pressure sodium lamp to inhibit flowering of chrysanthemum and velvet sage

Photoperiod is commonly controlled in the commercial production of ornamental crops to induce or prevent flowering. Flower induction in short-day (SD) plants can be prevented or delayed when the natural daylength is short by providing low-intensity lighting during the dark period. A stationary high-pressure sodium (HPS) lamp with an oscillating aluminum parabolic reflector (cyclic HPS) has been developed to provide intermittent lighting to greenhouse crops. We determined the efficacy of a cyclic HPS lamp at preventing flowering in SD plants garden chrysanthemum [Chrysanthemum × grandiflorum (Ramat.) Kitam.] ‘Bianca’, pot chrysanthemum ‘Auburn’, and velvet sage (Salvia leucantha L.) relative to traditional night interruption (NI) lighting strategies. Plants were grown in a glass-glazed greenhouse at a mean daily temperature of 19.5–20.7 °C with natural SD photoperiods. NI lighting was delivered during the middle of the night (2230–0230 h) from a 600 W cyclic HPS lamp mounted at one gable end of the greenhouse or from incandescent (INC) lamps that were illuminated for the entire 4 h (CONT INC) or for 6 min every 30 min for 4 h. Plants under cyclic HPS were grown at lateral distances of 1, 4, 7, 10, or 13 m from under the lamp. Control plants were grown under an uninterrupted 15 h skotoperiod. As the distance from the cyclic HPS lamp increased from 1 to 13 m, the maximum irradiance measured during the NI decreased from 25.4 to 0.3 μmol m⁻² s⁻¹ and time to visible inflorescence (VI) and the number of nodes at VI decreased. All species had a VI within 54 d, but ≤10% of plants flowered when grown at a lateral distance of 1 or 4 m from the cyclic HPS lamp or under CONT INC. Plants grown without NI had a VI 2 to 15 d earlier and flowered 7 to 24 d earlier than plants grown at 10 or 13 m from the cyclic HPS. All garden chrysanthemums flowered under cyclic INC, whereas velvet sage and pot chrysanthemum had 15% and 35% flowering, respectively. These results indicate that a cyclic HPS lamp can be used effectively to delay flower induction and prevent flowering in these species when NI is delivered at ≥2.4 μmol m⁻² s⁻¹.